For example, BYTE -> 03, WORD -> 0A01, DWORD 100400D3 -> PCI type support DWORD only File name -> File name of FD If [Offset] & Mask == Value, then flash the following file. Support Windows PE 2.0 x64 version User must run InsydeFlashx64.exe in x64 PE. This flag is the switch of comparing bios project ID with ROM file project ID.
BIOS Tablet Odys WinTab8
- Curl and libcurl web site contents. Contribute to curl/curl-www development by creating an account on GitHub.
- Full test automation (via config file) New 64-bit/SIMD tests7 New Row hammer test Saving RAM benchmark reports to disk. Screenshot for Memtest86 Free Edition.
- The following are 50 code examples for showing how to use htmlentitydefs.name2codepoint.get().They are extracted from open source Python projects. You can vote up the.
- When flag is 1, utility will check project ID of new file.If ID doesn 't match, utility will;close the application. When flag is 0, utility won' t check project id.
Marka:Odys Model:WinTab8 Chassis (p造ta lub g堯wne podzespo造): Inne (uwagi): Uruchom plik BIOS_D8012_WINTAB8_PBR_20140725 H2OFFT-w.exe jako administrator.
No Match File In Multi-fd Acer
- BIOS_D8012_WINTAB8_PBR_20140725.zip
- BiosImageProcx64.dll
- FWUpdLcl.exe
- FlsHookDll.dll
- AtpTimerInfo.dll
- platform.ini
- Array
- iscflash.sys
- iscflashx64.sys
- xerces-c_2_7.dll
- AtpTimerInfoX64.dll
- Ding.wav
- H2OFFT-W.exe
- FlsHook.exe
- iscflashx64.dll
- iscflash.dll
- BIOS_8MB.bin
- BiosImageProc.dll
Download file - link to post
BIOS_D8012_WINTAB8_PBR_20140725.zip > ReleaseNotes.txt
No Match File In Multi-fd
H2OFFT (Flash Firmware Tool) for Windows (Use IHISI)
Version 5.49
------------
1.fix bugs : fix AP stop working for warning DC too low message.
Version 5.48
------------
1. supports feature: supports Action_20h in [UpdateEC] for passing action code via Ihisi 20h.(For specific OEM/ODM)
2. fix bugs : fix NOT protect region in PFAT update.
3. fix bugs : fix update error if Ihisi 41h implemented but not supports PFAT.
4. fix bugs : fix warning message for platform check. (For specific OEM/ODM)
5. fix bugs : fix not works of command /s. (#31398)
6. fix bugs : supports ini-override for DisableCompare in [Others] (#31399)
7. fix bugs : fix NOT works in [Version] (#31400)
8. fix bugs : fix NOT call Ihisi 16h in secure update.
9. Upadte iFdPacker to v2.4.1
9-a. fix issue of extraction fail in dual mode.
Version 5.47
------------
1. fix bugs : fix issue of execute without parameter in console if command filter enable.
Version 5.46
------------
1. Upadte iFdPacker to v2.4.0
1-a. fix issue of exception occurred in packing EFI flash.
1-b. disable UAC.
Version 5.45
------------
1. supports feature: supports command -OemCus for specific string of Ihisi 19h; (For specific OEM/ODM)
2. fix bugs : fix NOT disable check AC if command -forceit enable. (For specific OEM/ODM)
3. fix bugs : fix update error in command -pbi. (For specific OEM/ODM)
4. fix bugs : supports command -pbi in secure platform. (For specific OEM/ODM)
Version 5.44
------------
1. supports feature: add percentage info in progress bar.
2. supports feature: supports EC size un-defined in IHISI 21h. (IHISI version required: 2.0.4)
3. supports feature: supports command " -extrFD " to extract FD in package mode. (IFDPacker version required: 2.3.8)
useage: -extrFD [path].
4. Upadte iFdPacker to v2.3.8
4-a. supports command " -extrFD " .
5. fix bugs : update the IHISI version for funcation 10h to 204;
Platforms support 0x1F
------------+--------------------
Broadwell 05.03.51.0014
SharkBay 03.73.06.1067
Bay Trail-T 05.03.47.0033
Bay Trail-M 05.03.47.0021
Kaveri 03.74.03.1015
Mullins 03.74.03.1009
Kabini 03.74.03.2047
Richland 03.74.03.1052
Version 5.43
------------
1. Supports feature: Add new section [AutoWakeup] with key that can enable auto power on via RTC.
2. Upadte iFdPacker to v2.3.7
2-1. fixs issue CANNOT pack dual mode on OS win8.1. (#0029474)
2-2. fixs pack fail via command line.
2-3. fixs pack dual mode fail if working folder NOT the same with application folder.
Version 5.42
------------
1. Fix issue: CANNOT launch Intel ME utility by flash utility to update ME.
2. Supports feature: Add IHISI 1Fh to notice BIOS can enter/leave EC idle mode .
3. Supports feature: Add new key " Elapse " under [UI] which can enable to show Elapse time on screen.
Version 5.41
------------
1. supports command " -mfg " .
2. apply new naming to H2OFFT-W.exe/H2OFFT-Wx64.exe.
3. Upadte iFdPacker to v2.3.5
3-1. update UI
3-2. fixs issue to avoid to add duplicate file in H2OFFT folder.
3-3. supports new utility nameing.
3-4. supports drag to select file or folder.
Version 5.40
------------
1. fix issue of update with previous version that shows incorrect message if flag=2 in [BIOS_Version_Check].
2. supports multi NV Storage from Ihisi 1Eh.
3. supports multi PEI from Ihisi 12h.
3. supports viaESP in [SecureUpdate]. (note: specific BIOS version required)
4. Upadte iFdPacker to v2.3.4
4-1. fix issue of incorrent warning message in shell mode.
Version 5.39
------------
1. Support: Update BIOS according to 32-bit or 64-bit OS(Multi-FD).
2. Solving exception occurrence when Window 8.1 system is rebooting.
(Using another method to prevent this error occur.)
Version 5.38
------------
1. Fix issue: Flash tool will pop up an error message when rebooting(32bit application).
Version 5.37
------------
1. update [CapsuleAudit] behavior to searching GUID in firmware volume.
2. Upadte iFdPacker to v2.3.2
2-1. Support packing dll for [CapsuleAudit].
3. fix progress bar display issue in normal update.
4. fix issue of update PEI region fail if [Force flash] BB_PEI=1.
5. fix issue of update NV Storage if Secure boot supports.
Version 5.36
------------
1. Fix -forceit, -nopause no function issue. [For specific OEM/ODM]
2. supports [CapsuleAudit] in platform.ini.
3. Update EC flash behavior.
When flashing EC, BIOS must provide EC part information by IHISI.
Otherwize it will get a " Get EC part infromation fail. " error.
4. supports Pause in [FlashComplete].
5. supports EC_DockWarning in [UpdateEC].
Version 5.35
------------
1. Supports update OEM ME when doing secure flash (BIOS and BIOS+EC case).
Version 5.34
------------
1. When flashing an unsigned PFAT image, display " The image is PFAT image but not signed " error message.
2. Supports PFAT update with region protection.
3. Fix error of [AC_Adapter] for AC warning message for secure capsule update.
Version 5.33
------------
1. Supports ConfirmDialogCustomizeMessage of [UI] for additional notification in confirm dialog.
2. Add to pass EC flash flag to BIOS by IHISI 19h when security image on noraml platform. [For specific OEM/ODM]
Version 5.32
------------
1. Update OEM message when flashing secure image on normal platform and normal image on secure platform. [For specific OEM/ODM]
2. Fix when [UI] ConfirmInfo and ConfirmInfoRDate set to 1, utility will BSoD.
3. Update [BIOSVersionFormat] to support new type D (Don't care field). Detail usage please reference the descriptions in platform.ini
Version 5.31
------------
1. Fix can't get correct vendor ID issue.
2. Notify BIOS the flash result by IHISI 1Ah.
3. Passing flash status to BIOS when flash complete by IHISI 16h.
Version 5.30
------------
1. Support -unvs, -ufc, -skipsbp in command filter feature.
2. Add warning message in save BIOS command (-g) when ME is locked.
3. Upadte iFdPacker to v2.2.8
3-1. Support packing multi FD for SHELL package.
3-2. Remove argument filter check box.
Version 5.29
------------
1. Supports command filter feature.
Version 5.28
------------
1. Supports PFAT image flash on platform PFAT feature disable. (BIOS version required: SharkBay 03.72.37.0018)
2. Supports PFAT checksum verify.
3. Adding [UI] ConfirmInfoRDate to support showing release date on confirm dialog. (BIOS version required: 03.72.43)
4. Fix missing last section of platform.ini in ini overwrite feature.
Version 5.27
------------
1. Support PFAT image update. (BIOS version required: SharkBay 03.72.37.0018)
2. Fix -edt#@: " Value " command may fail issue.
3. Support ini override for secure capsule update.
4. Fix can't get secure capsule model name and version issue on Strawberry Mountain 05.02.34.
5. Upadte iFdPacker to v2.2.7
5-1. Support packing multi FD for DOS package.
5-2. Update the behavior of pack platform.ini for secure image for DOS and Shell package.
(Don't disable platform.ini pack option when secure image detected for DOS and Shell package.)
Version 5.26
------------
1. Add command -edt#@: " Value " for update customize data (such as logo with signature) by IHISI.
#: from 4 ~ C, @: F, S, W, DW (F means file, S means string, W means word value, DW means double word value)
2. Support compare model name method in [Multi-FD] section.
3. Fix the system hang issue that flashing secure image (include BIOS + EC) on normal platform it may hang after EC flash complete and before restart.
4. Upadte iFdPacker to v2.2.6
4-1. Fix Message error of windows package run in DOS mode.
4-2. Fix pack error in fd path with space.
4-3. Fix help message error.
Version 5.25
------------
1. Update version check behavior for OEM. [For specific OEM/ODM]
2. Fix OEM flash image size error issue. [For specific OEM/ODM]
Version 5.24
------------
1. Support OEM message when flashing secure image on normal platform and normal image on secure platform. [For specific OEM/ODM]
2. Upadte iFdPacker to v2.2.5.
2-1. Add platform.ini pcak option in UI for Windows package.
2-2. Modify ini pack flag for command line.
2-3. Disable platform.ini pack option when secure image detected for DOS and Shell package.
2-4. Fix the parameter checking behavior for command line mode.
Version 5.23
------------
1. Add DisableSecureCapsuleFlash flag in [Others] section in platform.ini to enable/disable flash secure BIOS on normal platform.
2. Supports OEM secure flash behavior. [For specific OEM/ODM]
3. Add version check rule for OEM. (it must base on BIOS report.) [For specific OEM/ODM]
4. Fix CommonFlash will be disabled when using Multi-FD feature. [For specific OEM/ODM]
5. Update AT-p behavior. It does NOT check AT-p signature in plaform supported when flash EC only.
Version 5.22
------------
1. Fix can not update issue when input image is a secure capsule with BIOS and EC.
2. Fix showing " The secure BIOS is signed by older version of security flash. " issue when flashing a normal image on secure platform.
3. Disable option button on secure flash mode.
4. Update AT-p behavior. It can allow to flash when enrolled. The function is enabled by BIOS and BIOS must report the Dtimer status in IHISI.
5. Add [UpdateOEMME] CheckVersion=3 setting, let it continue to flash when OEM ME update fail.
Version 5.21
------------
1. Support to flash a secure capsule on a normal platform by normal flash method.
2. Upadte iFdPacker to v2.2.4.
2-1. Add auto save previous settings feature.
2-2. Add shell single package support.
2-3. Add command line support. (Use " iFdPacker -h " to see the usage.)
Version 5.20
------------
1. Update Intel ME flash tool and add a Command setting in platform.ini [UpdateOEMME] section for customizing command.
2. Fix the issue that NV storage area still be cleaned even BIOS already report the area information by IHISI 1Eh on secure boot support platform.
Version 5.19
------------
1. Fix cannot flash secure bios which pack with EC image and set [UpdateEC] Flag=1 in secure flash mode.
2. Fix flash complete call twice issue.
3. Add all console command support -option.
4. On the platform which supports secure boot feature, utility will not flash the NV storage area which reported in IHISI 1Eh.
5. Fix secure flash 16MB+EC image cannot flash issue.
6. Fix the issue that power saving set is changed after update BIOS with enabling to lock mouse and keyboard.
7. Fix private region is not protected when -pbi command is executing.
Version 5.18
------------
1. Add do nothing action for 48h. And add some command for secure flash action override. [FlashSecureBIOSOverride] Action=0 for S3, Action=1 for reboot, Action=2 for shutdown, Action=3 for do nothing.
2. Add EFI driver version check for secure BIOS flash.
3. Detect current platform support secure update or not. It only allow to update secure BIOS on secure platform.
Version 5.17
------------
1. Update OA function behavior to meet Microsoft new requirement.
Version 5.16
------------
1. Support " InsydeFlash.exe BIOSFile.bin " command.
2. Fix the issue that Windows flash can run with guest account after run once with administrator account.
3. Modify AT-p error message.
4. Remove flash by AP feature. And remove platform.ini [ApplicatonFlash] section.
Version 5.15
------------
1. Remove flash progress message console output when it's running in silent mode.
2. Update iFDPacker to v2.2.1. Support packing DOS & Windows flash utility in single package.
I.e. the sinagle package can runs on DOS and Windows.
Version 5.14
------------
1. The setting always show " BatteryBound=20 " after set " [AC_Adapter] BatteryBound=30 " in User option mode.
2. Modify -pbi to support all protection type.
3. Update driver for new interface of secure capsule flash.
Version 5.13
------------
1. Update -nopause behavior for OEM.
Version 5.12
------------
1. Add BatteryNotConnect, BatteryCapacityNotEnough in platform.ini.
2. Support 16M bios in secure capsule flash mode.
3. Update AT-p check behavior in WinPE.
Version 5.11
------------
1. Fix can not get correct SMI port issue in VIA VX900 platform.
2. Reduce memory usage of driver in non-secure flash mode.
3. Revise OEM specific error message for profile update (-pbi:Type command).
Version 5.10
------------
1. Support OEM specific error message for profile update (-pbi:Type command).
2. Fix the region may not be protected when start address + size equal to 0x100000000 which overflow of DWORD size.
Version 5.09
------------
1. Add Insyde Secure BIOS identify.
2. Update message of running secure capsule flash fail(call 48h fail).
Version 5.08
------------
1. Add conditional data check by bios (45h) feature. Enable/Disable flag is CheckByBios of [Bios_Version_Check] section in platform.ini.
2. Add user define error message for conditional data check by bios feature. The message is defined in CheckByBiosErrorMessage of [Bios_Version_Check] section in platform.ini.
3. Enlarge file size limitation of non-share EC size from 64KB to 256KB with single block write method.
4. Modify the default value of Version in [Version] section from " 00 " to empty string. On main dialog, it will show " InsydeFlash V5.08 " as default not " InsydeFlash V5.08.00 " .
5. Add admin password check in flash protected region feature (with -pbi:Type) for OEM.
6. Support specified size of flash rom. Such as 5M(1M+4M), 6M(2M+4M) flash rom.
7. In secure flash mode add re-boot/shutdown function for WinPE.
Version 5.07
------------
1. Update message string.
2. Fix the issue that [Bios_Version_Check] flag=2 and BIOS allow same version to flash, when flash the same version it will show error message " Warning: cannot check BIOS version. " .
Version 5.06
------------
1. Add EC compare and verify feature. The settings in platform.ini [UpdateEC] section, EC_Compare, EC_Verify and EC_VerifyErrorRetry.
2. Support passing multi project name to BIOS in CommonFlash feature for OEM.
3. Fix Hook functions can't correctly work (include mouse, keyboard, power button, sleep button, lid closed) on Win7 environment
4. Update iFDPacker to v2.2.0.0
Version 5.05
------------
1. Update AP pass to BIOS structure in CommonFlash feature for OEM.
2. Reduce initial time which cause by searching BVDT of on board BIOS.
Version 5.04
------------
1. Support move private map feature.
2. Disable Power button, Sleep button, and Lid closed function during flashing (controlled by DisableMouseAndKeyboardInput flag)
3. Fix EC can't update issue when EC image size is bigger then 64KB.
4. Fix that run iFdPacker.exe and click the Add button, " Encountered an improper argument " error message will occur
Version 5.03
------------
1. Remove update logo feature.
2. Add -forcetype, -forceit, -nopause for OEM menufacture mode.
3. Add error message when protected region type not found with -pbi:Type.
Version 5.02
------------
1. Update AtpTimerInfo.dll from v3.0.0.18 to v3.0.0.20, fix the load driver fail issue in Windows XP.
2. Fix the issue that utility always shows the same version and won't flash when PermitFlashVersion is enabled and the value of SingleVersion is the same as on board BIOS version.
3. Update iFDPacker to v2.1.8.0, fix single package won't ask for administrator privilege in x64 OS issue.
4. Add profile flash support by command line " InsydeFlash profile.fv -pbi:Type " . It can be used to update partial region base on protecting map.
Version 5.01
------------
1. Fix -wb issue that writing variable from file didn't actually write the data
(the data field of the variable is empty after using -wb parameter).
2. Add to pass EC flash flag to BIOS by IHISI 19h.
3. Fix the issue that flash utility didn't pop up warning message and do flash directly in DC mode on WinPE.
4. Fix -forcetype not workable issue.
Version 5.00
------------
1. Update AtpTimerInfo.dll, AtpTimerInfoX64.dll.
2. Add return code for [CommonFlash] interface when there is an error occur in the interface.
3. Fix to flash partial image will fail.
4. If file name has " /:*? " & lt; & gt; | " ,tool will change to " _ " in BackupROM.
5. Fix the issue that update same version ME will show an error message but the message end with some unreadable characters.
6. Add multi ini support. It can support ini settings overwrite by adding ini file name in [MULTI_FD] section.
7. Fix cannot show SMI error dialog.
8. Update iFDPacker to v2.1.6.0.
Version 4.04
------------
1. Support customize error message in [UpdateExtraData] section.
2. Fix passing platform.ini to bios data error.
Version 4.03
------------
1. Add a command line parameter /noconfirm to disable confirm dialog. (This command must add as latest parameter.)
2. Modify Silent flag to match " -s " silent mode.
3. Update iFDPacker to v2.1.5.0. Fix v2.1.3.0 can't work in Windows 7 issue.
Version 4.02
------------
1. Fix the issue that InsydeFlash settings in " Option " and " Browse FD File " buttons won't effect until next launch.
2. Fix /cpf will load driver twice error.
3. Modify iFDPacker to package FlsHook.exe and FlsHook.dll.
Version 4.01
------------
1. Change sequence of id and size check function, and remove flag " Check_Before_ROM_Size " .
2. Add to check extra data image and pop error message.
3. Fix cannot show confirm dialog in silent mode with " SilentWithDialog=2 " .
4. Fix cannot check bios size when image with header.
5. Add UI for silent mode normal flash process.
6. Fix do not show error when cannot found match file in multi-fd feature.
7. Fix the issue that AC power will be checked in UEFI flash when [CommonFlash] is removed.
8. Fix cannot show date in confirm dialog.
9. Support log status code to CMOS. The settings are in [Log_file] section with prefix CMOS_.
10. Fix the issue that USB mouse can work when flashing VBIOS region.
11. Fix will show & lt; N/A & gt; in new version edit.
Version 4.00
------------
1. Fix return code error issue when driver load fail.
2. Fix can't run EFI flash issue when [BIOSVersionFormat] BIOSVFEnable=1.
Version 3.99
------------
1. Modify warning message to " Do Not Remove the AC Power and Turn Off Computer During BIOS Flashing! " for OEM.
2. Modify definition of [Others] VerifyErrorRetry key from enable/disable retry to retry times.
3. Fix flash extra data with no data in image will error.
4. Fix show dialog with " DisableMouseAndKeyboardInput " will lock keyboard and mouse.
5. Don't check AC power in UEFI flash.
6. Allow same version flash in non-silent mode when [Bios_Version_Check] Flag=1 for OEM behavior.
Version 3.98
------------
1. Fix flash data size error in extra data feature.
2. Fix x64 common flash interface fail issue.
Version 3.97
------------
1. Fix UEFI flash will get error data with non-share EC update.
2. Fix that cannot flash BIOS after Intel ME update.
3. Support password check by BIOS feature (IHISI 43h).
4. Support flash by BIOS check feature (IHISI 44h).
5. Add new return error code in [ReturnErrorCode].
6. Fix 3D feature cannot flash VBIOS data.
Version 3.96
------------
1. Support show IHISI version.
2. Modify " UpdateExtraData " feature to support 3D panel.
3. Fix Windows PE cannot shutdown and reboot.
4. Fix the issues cause by Unicode feature.
Version 3.95
------------
1. Fix /ecp cannot get IHISI version from BIOS.
2. Modify to support flash EC only.
3. Extracting image size is incorrect for OEM feature.
4. Add a section [PermitFlashVersion] to support conditional process of BIOS update.
When a serial bios from old to new is version A B C,
the newest bios update package is version C,
and version C only can update from version B.
Then you can use this feature to warning user of version A on board to update to version B first.
5. Add EC_Path key of [UpdateEC] section to support update EC by inputed file path.
6. Fix bug: When CheckVersion=2 and the ME FW is the same, it will close intel tool and doesn't continue to update BIOS.
7. Fix bug: Set Platform_Check flag=1 and Bios_Version_Check flag=1 to platform.ini,
when bios version check is pass and platform ID is different, then WinFlash will flash the bios.
Version 3.94
------------
1. Fix cannot flash DXE region when you set " DXE=1 " in 32 bit OS.
2. Fix flash in silent mode with not SilentWithDialog=1 and ActionOverride=1 will
return error return code.
3. Add " /ECP " feature to flash non-share EC only.
4. Modify AT-p feature.
5. Version check enhancement, add [BIOSVersionFormat] section in platfrom.ini.
6. Modify to flash ME before BIOS.
Version 3.93
------------
1. Fix " Reboot! " dialog can't popup after flash in command silent mode if set
" SilentWithDialog=2, [FlashFlashComplete]Action=2, Dialog=1 "
2. Fix will pop EC auto close dialog in silent mode with SilentWithDialog=1.
3. Fix will not passing ini to BIOS when run OEM1 special flash rule.
4. Add " ForceIHISIVersion " in " Others " section.
Version 3.92
------------
1. Add " ActionOverride " flag.
Flash utility bases action key setting to do original behavior.
2. Fix /cpf cannot process issue.
3. Fix when flash extra data with " DisableMouseAndKeyboardInput=1 " will show error.
4. Add a section [PlatformVersion] in platform.ini.
When the Flag=1 and platform check enabled, it will display the version string
list in this [PlatformVersion] section and use it to compare.
The Version is pair with the PlatformName.
For example: When the platform ID matches with PlatformName2, the Version2 will be used.
Version 3.91
------------
1. Add new action definition when EC update completely.
2. Fix cannot copy correct BIOS image with sign file to USB dangle in Window XP system.
Version 3.90
------------
1. Add 16M ROM support
2. Add feature to pass parameter setting in platform.ini to BIOS.
3. Fix incorrect dialog pop up that cause when AT-P function enable and bios update only.
4. Fix update non-share EC feature error.
Version 3.89
------------
1. Rename " ErrorRetryDelay " to " SMIErrorRetryDelay " .
2. Rename " ErrorRetry " to " VerifyErrorRetry " .
3. Fixed some situation will not return error code.
4. Update AtpTimerInfo.dll to 2.0.2.24.
5. Added silent mode return code and flash complete action.
Version 3.88
------------
1. Fixed some error return bugs.
2. Modify OEM special feature in silent mode with SilentWithDialog=1.
3. Updated 32bits AT-p component (AtpTimerInfo.dll).
4. Fix file path conver from unicode to ansi string will lose the non-English words issue.
Version 3.87
------------
1. Pure 64bits application support AT-p utility.
2. Added update extra data feature to update VBIOS.
Version 3.86
------------
1. Fix the issue that system will crash after flashing when Check_Before_ROM_Size = 1.
Version 3.85
------------
1. Added " AllowVersion " to support OEM1 EFI update feature.
2. Fixed flash non-share EC, EC cannot shutdown/Reboot. Update from 3.84.
3. Fix incorrect spelling in " The BIOS image is corrupted or does not contain the correct digital signature. The system BIOS will not be updated. "
Version 3.84
------------
1. Added check platform ID for UEFI update.
2. Add new warning/error message for AC/DC and Platform/Version check.
(OEM specified message requirement)
3. Fixed flash whole BIOS with non-share EC or only BIOS region will show file size may not match.
Version 3.83
------------
1. Fixed Can not flash only BIOS region and non-share EC.
2. Support up to 20 PlatformName in platform.ini.
Version 3.82
------------
1. Add /cpf command for copy file to specific partition and folder.
Version 3.81
------------
1. Fixed IHISI failed when run /g command then run InsydeFlash again.
2. Fixed can not run InsydeFlash from different folder.
Version 3.80
------------
1. Modify " CheckVersion " . If set 2, tool will not show error and continue to flash
when ME flash error is cause of same version and downgrade version.
2. Fixed flash only BIOS region with only BIOS region data will not show new version and check version.
3. Removed SMI error code in SMI error message.
4. Fixed flash bios failed with AT-p utility.
5. Fixed EC size error.
Version 3.79
------------
1. Added " ErrorRetryDelay " and " SMIErrorRetry " at section " Others " in " Pltform.ini " .
2. Modify behavior of OEM special signed feature.
3. Added solution that tool cannot identify BIOS binary (single BIOS region) is AT-p or non-AT-p BIOS.
4. Fixed that finished updating single BIOS region cause fail with AT-P utility.
5. Fixed that execute tool casue fail on Windows XP.
Version 3.78
------------
1. Added Calpella ME feature.
[UpdateOEMME]
MEFileName=
CheckVersion=0
2. Added option " /ecr " and " /ecw " to access extend CMOS.
3. Modified " UpdateME " to " UpdateOEMME " and run Calpella ME feature.
4. Modified behavior about AT-p feature in tool.
5. " BeforeRunToolDelayTime " will Delay before UI dispaly.
Version 3.77
------------
1. Fixed get IHISI version error.
2. Added " MPCIIO " in Multi-FD.
You can input many " PCI " or " IO " to check, even if " PCI " and " IO " .
If all of them match, tool will get this file to flash.
Version 3.76
------------
1. Modify when flash EC, tool will check EC rom size before flash BIOS.
This is depended on IHISI version.
When IHISI is newer than 1.8.6, it will check before BIOS flash.
If not, it will check after BIOS flash.
2. Fixed flash EC with BIOS will flash many times error.
4. Added " DelayBeforeFlash " to delay before flash.
5. Modify " BeforeFlashDelayTime " to " BeforeRunToolDelayTime " .
6. Added some messages and modified behavior about AT-p feature in tool.
8. Modify confirm message.
Version 3.75
------------
1. Fixed tool will send wrong EC size to BIOS with non-share EC.
2. Extended the EC buffer size to 2M.
3. Support OEM special request about check RSA check sign feature.
4. Skip check platform name and version feature will confirm BIOS.
5. Modify when flash EC, tool will check EC rom size before flash BIOS.
6. Add Platform data region access feature.
7. Add Platform_Check = 3 and Bios_Version_Check = 2 will get BIOS setting.
8. Modify default value of Platform_Check, Bios_Version_Check and ALL.
Version 3.74
------------
1. Modify main dialog logo and string font.
2. Added tool and BIOS hand shaking feature.
Tool send BIOS information that include tool and OS version by functoin 10h.
Get the customer vendor ID in function 10h.
Version 3.73
------------
1. Fixed to use /base /size option will hang.
2. Fixed to erase variable by ini will hang.
3. Fixed when setting " flag=2 " in the section name " PlatformCheck " will get new name when current
platform name and new platform name are match.
Version 3.72
------------
1. Fixed tool will show " Winodws 7 " when it can not load driver in Windows XP.
2. Fixed tool will wait when using silent mode with no AC plug in.
3. Fixed error message when binary file not with EC part in UpdateEC feature.
Change show " Error:File may not have ME rom " to " Error:File may not have EC rom " .
4. Fixed platform check get ID fail, when updateEC flag = 2.
5. Add " /base: " and " /size: " to input base and size when use " /g " to read BIOS.
6. Modify Silent mode behavier:
When SilentWithDialog=0, Not show any dialog.
When SilentWithDialog=1, Show main dialog only.
When SilentWithDialog=2, Show all dialogs without main dialog.
7. When SilentWithDialog=1 and run in silent mode, tool will check same version and not flash.
(This Silent mode is mean use " -s " in command line)
Version 3.71
------------
1. Add " /lg: " to input the GUID.
Version 3.70
------------
1. Fixed the situation that tool will hang in XP on some platforms.
Version 3.69
------------
1. Modify Me flash feature.
Support separate ME binary, and two type of Me:
1. FULL SKU.
2. Ignition SKU.
Version 3.67
------------
1. Add " /cr " and " /cw " to access CMOS in console mode.
2. Fixed some error word in status message when option flag set.
Version 3.66
------------
1. Add flash Me feature.
2. Fixed message from " If you are running this utility in Vista " to
" If you are running this utility in Windows 7 " for Windows 7 system.
Version 3.65
------------
1. Do not show dialog with " -s " .
2. Fixed the problem can not get the return code.
3. Add flag " SilentWithDialog " .
Version 3.64
------------
1. Modify the EC shutdown and reboot to get the " Action " in " FlashComplete " .
2. Change " flag " in " Platform_Check " . If flag=1 compare new rom platform name
and current platform, else if flag=2 get the below names to compare.
Version 3.63
------------
1. Add " Progress_Bar " in ini file: Flash EC with draw progress bar.
Version 3.62
------------
1. Add " BIOS_Only " in ini file: Only flash BIOS when EC and bios are merge in the same file.
Version 3.61
------------
1. Before update EC after flash bios show dialog, change status and add flag " EC_Dialog=0 " in ini file.
2. Fixed when tool flash on Calpella, the SMI will fail sometimes.
Version 3.60
------------
1. Expand EC buffer to 0x100000.
Version 3.59
------------
1. Fixed can not flash when rom file with platform region.
Version 3.58
------------
1. Fix the tool cound not run in UEFI OS (GPT format).
Version 3.57
------------
1. 8M support.
2. Fixed the error message when you flash same bios.
3. Fixed UpdateBlock feature about coundn't flash if physical address small than 0xFFF00000.
4. Fixed the processbar action problem, sometimes cound not process.
Version 3.56
------------
1. Fix BVDT Protect when the move region size smaller than 0x1000.
Version 3.55
------------
1. Fix BVDT protect function.
Version 3.54
------------
1. Fix some bug and some dialog string.
2. Modify backup rules.
[BackupROM]
Flag=0
FilePath=
FileName=
Flag 1 - & gt; Backup current BIOS and new BIOS binary
FilePath - & gt; If user does not enter the file path, utility will use current directory.
FileName - & gt; If user does not enter the file name, utility will use platform ID.
xxx.xxx = Current BIOS image
xxx_01.xxx = Previous BIOS image
xxx_new.xxx = New BIOS image
Version 3.53
------------
1. Fix a bug in FlashTester.
Counter is not correct.
2. Add mew BVDT protect function
3. Modify " Error:No FD match in INI settings. " to " It is not for your notebook. "
Version 3.52
------------
1. Add new key in INI setting.
The " Disable read " function in DOS Flashit will skip " Compare " and " Verify " steps.
In INI file, " DisableCompare " only skip " Compare " step.
However, some OEM/ODM projects can not read binary from flash part.
Windows version add " DisableVerify " key in INI, It will disable " Verify " step if this key is 1.
2. Add BIOS binary selection in INI file.
[MULTI_FD]
Flag=1
FD#01=PCI,0,1F,2,80,7006,7007,9.fd
FD#02=PCI,2,0,0,4,100006,100007,7.fd
FD#03=PCI,2,0,0,18,0c,0e,9.fd
FD#04=PCI,0,1f,0,0,0015808F,2815808F,8.fd
FD#05=IO,C0,5AABFE02,5AABFE02,9.fd
FD#06=IO,1F6,E7,E4,7.fd
FD#07=IO,C0,fe03,fe03,7.fd
FD#08=IO,C0,03,01,7.fd
FD#09=PCI,2,0,0,0,813,812,9.fd
Flag 1 - & gt; Multi-FD mode, 0 - & gt; normal mode
FD#XX support 99 files FD#01 ~ FD#99
FD#XX=IO Type,Offset,Mask,Value,File name
FD#XX=PCI Type,Bus,Device,Function,Offset,Mask,Value,File name
Type - & gt; Support IO space and PCI address type
Offset - & gt; Offset (HEX)
Mask - & gt; IO type support BYTE, WORD, DWORD (HEX). For example, BYTE - & gt; 03, WORD - & gt; 0A01, DWORD 100400D3
- & gt; PCI type support DWORD only
File name - & gt; File name of FD
If [Offset] & Mask Value, then flash the following file.
3. Support Windows PE 2.0 x64 version.
User must run InsydeFlashx64.exe in x64 PE.
The user can make pure x64 InsydeFlash in FD Packer.
4. Support FD argument.
For example: Run InsydeFlash.exe xxx.fd
It will skip MULTI_FD in INI and auto-searching FD.
5. Support /g argument.
For example: Run InsydeFlash.exe xxx.fd /g
Just like DOS version, user can read current ROM to a file.
6. Verify regions (descriptor mode) in ROM file.
Version 3.48
------------
1. When user enable UAC in Vista, the user need to " Run as administrator " with InsydeFlash.
Now, InsydeFlash will notice Vista. Vista will pop up message box.
2. Fix unstable place when InsydeFlash is initializing.
Version 3.47
------------
1. Change InsydeFlash behavior.
OLD: Even AC flag is 1, AC adapter does not plugged but battery life percent is fine. InsydeFlash allow flash process.
NEW: If AC flag is 1, AC adapter should be plugged.
Version 3.46
------------
1. Fix a battery detection bug.
InsydeFlash will get current battery life percent value from OS and compare with value in platform.ini.
[AC_Adapter]
BatteryCheck=1
BatteryBound=20
Also, if battery life percent is not enough, it will display the value in message box.
Version 3.45
------------
1. In platform.ini, InsydeFlash add more keys for model checking process.
For example, ODM may have one BIOS for different model.
They need to use different ID in different model.
There are two kinds of solutions.
First, user add ID list in ini file. User set Flag to 2.
[Platform_Check]
flag=2
PlatformName=AAA1
PlatformName2=AAA2
PlatformName3=AAA3
PlatformName4=AAA4
PlatformName5=AAA5
PlatformName6=AAA6
PlatformName7=
PlatformName8=
PlatformName9=
Second, ODM reports all IDs in one string at IHISI function 11h and BVDT.
For example, the string will be like " AAA1AAA2AAA3AAA4AAA5AAA6 " .
Also, some share ROM model need check EC's id, ODM can combine the ID with this string.
2. iFdPacker version 2.0.5
The single execution file's icon change to official Insyde icon.
Version 3.44
------------
1. Platform.ini add [VARIABLE] to erase variable.
Version 3.43
------------
1. Fix flash after platform can not boot to OS.
Version 3.42
------------
1. Confirm dialog always on top.
Version 3.41
------------
1. Fix fail issue that user press start button.
Version 3.40
------------
1. Add a GET FD file button.
[UI]
GetFDFileButton=0
Version 3.39
------------
1. Add a wrong mesage box.
Version 3.38
------------
1. Add when error message occur, unlock keyboard and mouse.
2. Fix PlatformName by ini display error.
Version 3.37
------------
1. Fix " Alone Flash Region binary file " function can not flash EC.
2. Fix " Alone Flash Region binary file " function flash protect area issue.
Version 3.36
------------
1. Fix " Alone Flash Region binary file " function issue.
Version 3.35
------------
1. Add " Alone Flash Region binary file " function.
2. Modify " write HDCP key " function read file rule.
Version 3.34
------------
1. Remove program window (X) button.
2. Add Retry checking AC power function.
3. Modify some wrong message.
4. Add on flashing playing wav file.
5. Support IHISI function 19h.
6. Lock all input without system key ( " CTRL+ALT+DEL " ).
7. Add check platform name by .INI function.
8. Add return code set by .INI.
9. Add a new argument(/WH) for " write HDCP key function " .
10. Support IHISI 1.7.4 (OEM/ODM customization-2).
Version 3.33
------------
1. Fix driver bug.
2. Add /EV arguments.
Version 3.32
------------
1. Add Disable read compare by IHISI (function 11h).
2. Add new Variable (SLP2M & SLP2P).
3. Add support IHISI spec 1.7.1 new feature.
4. Add Disable model name & Version display by IHISI (function 11h).
Version 3.31
------------
1. Add Display Wrong message on Dialog " Do not turn off your computer " .
Version 3.30
------------
1. Support R3.5 code base for " patch logo function " .
Version 3.29
------------
1. Add Region map arguments (BIOS, GbE, ME, DESC).
Version 3.28
------------
1. Add DLL_AP_FlashComplete function.
2. Add ICL50_M005_TURN_OFF_DTS.
3. Add APTURN_OFF_DTS.
4. Add AP_Read_Memory_Buffer.
Version 3.27
------------
1. Add error code configuration.
2. Add silent style in console mode (-s).
Version 3.26
------------
1. Add application flash (64bit).
Version 3.25
------------
1. Fix 64bit driver bug.
Version 3.24
------------
1. Add application flash (32bit).
Version 3.23
------------
1. Fix driver bug.
2. Add retry function.
3. Add read compare switch.
Version 3.22
------------
1. Add error return code.
2. Support binary variable access.
Version 3.21
------------
1. Add /C arguments
Version 3.20
------------
1. Add UI configurations.
Version 3.19
------------
1. Dynamic find IHISI main function number.
2. Add UI configurations.
Version 3.18
------------
1. Add BVDT.
2. Add ID display.
Version 3.17
------------
1. Fix buffer overflow bug.
Version 3.16
------------
1. Modify iFdPacker function.
Version 3.15
------------
1. Add /1 /2 /4 /8 arguments.
Version 3.14
------------
1. Add command line argument for iFdPacker.
2. Add FV ID protection.
Version 3.13
------------
1. Support BIOS IHISI 1.6.2.
2. Add log file argument.
Version 3.12
------------
1. Add command line arguments.
Version 3.11
------------
1. Fix UI block problem.
Version 3.10
------------
1. Add silent mode.
2. Add tool: InsydeFdPacker.
Version 3.06
------------
1. Add a key in INI for turn on/off end dialog.
2. Fix file not found bug.
Version 3.05
------------
1. Support BIOS IHISI 1.5.8.
2. Add FV update mode.
Version 3.04
------------
1. Support BIOS IHISI 1.5.7.
Version 3.03
------------
1. Support BIOS IHISI 1.5.6.
Version 3.02
------------
1. Supprt BIOS IHISI 1.5.5.
2. Utility can covert logo image.